Category Archives: Cable Gland

  Home Atlas Metal Industries Pvt. Ltd.  /  Cable Gland
ATEX Cable Glands Selection Guide - Atlas Metal
Categories Cable Gland

Ensuring Safety in Hazardous Environments: A Guide to Selecting ATEX Cable Glands

Categories Cable Gland Posted on

In the complex and hazardous environments where industries operate, safety is not just a priority; it is a necessity. Among the myriad components that contribute to a safe and efficient industrial setup, ATEX cable glands play a pivotal role. These components are vital for ensuring that all electrical installations in explosive atmospheres are safe, reliable, and compliant with international safety standards.

As one of the leaders in manufacturing quality custom metal solutions, Atlas Metal, an esteemed ATEX cable gland manufacturer in Jamnagar, India, emphasises the significance of choosing the right ATEX cable glands for your industry. This comprehensive guide aims to lay the foundation for understanding their importance, ensuring your installations uphold the highest safety standards.

What is ATEX? An Overview of Atex Directives and Standards

ATEX, derived from the French term ‘ATmosphères EXplosibles’, refers to two European Union directives that govern the safety of equipment used in explosive atmospheres. These directives ensure that equipment, including cable glands, can be safely used in hazardous conditions without igniting an explosion.

Understanding these guidelines is key to selecting cable glands that not only meet legal requirements but also maximise safety in your operations.

Types of ATEX Cable Glands: Features and Applications

ATEX cable glands are indispensable in ensuring safety in hazardous areas, with each type tailored for specific conditions and requirements. Understanding the variety and their unique features is essential for making an informed choice that aligns with your industry’s needs.

Increased Safety Glands (Ex e): These glands are designed to eliminate the risk of sparking and ensure that any external explosion does not reach the electrical circuit through the cable. They are best suited for zones where the presence of gas and dust requires a high level of protection but where the risk is not constantly present.

Flameproof Glands (Ex d): Capable of containing any explosion within the device, these glands are ideal for environments where explosive gases or dust are frequently or continuously present. They are engineered to withstand extreme conditions, ensuring that any ignition source is isolated from the hazardous environment.

Dust-proof Glands (Ex t): Specifically designed for areas with a high concentration of dust, these glands prevent the ingress of dust and protect against ignitions of combustible dust layers or clouds. They are essential for industries dealing with fine particulates that could pose an explosion risk.

Glands for Extreme Temperatures: Some environments not only pose risks of explosions but also operate at extreme temperatures. Cable glands designed for such conditions can withstand both the cold and heat, ensuring that their integrity and functionality are not compromised by temperature variations.

Each type of ATEX cable gland is crafted to address specific risks associated with different hazardous zones. Selecting the appropriate gland requires an assessment of various factors. This careful selection ensures that your installations are protected against the unique hazards they face, contributing to a safer working environment.

Factors to Consider When Choosing ATEX Cable Glands

Several critical factors must be considered when selecting ATEX cable glands for your industry. These include the specific zone classification of the installation area, the type of cables being used, the environmental conditions (such as the presence of corrosive substances or extreme temperatures), and the mechanical requirements (like strain relief and cable anchorage). Understanding these factors ensures that the selected cable glands provide optimal safety, reliability, and performance in hazardous environments.

Installation and Maintenance: Ensuring Long-term Safety and Reliability

Ensuring the safety and reliability of ATEX cable glands goes beyond selecting the appropriate model. The installation and maintenance of these components are critical to their performance and the overall safety of the electrical system within hazardous areas.

Follow Manufacturer Guidelines: Each cable gland comes with specific installation instructions from the manufacturer. Adhering to these guidelines is crucial for ensuring the gland’s effectiveness in hazardous environments.

Correct Fitting and Tightening: Proper installation involves ensuring that every component of the cable gland is correctly fitted and securely tightened. This prevents the ingress of hazardous elements and maintains the integrity of the electrical enclosure.

Use of Suitable Tools: Employing the right tools for installation is vital. Using inappropriate tools can damage the gland or the cable, compromising the safety of the installation.
Maintenance Considerations:

Regular Inspection: Schedule regular inspections of cable glands to identify signs of wear, damage, or loosening. Early detection of potential issues can prevent safety hazards.

Following best practices for installation and maintenance ensures ATEX cable glands offer optimal protection over their lifespan. Attention to detail in these processes is crucial for ensuring the safety and efficiency of installations in hazardous areas, protecting both personnel and assets.

Cost Considerations: Balancing Quality and Budget

While cost is an important consideration when selecting ATEX cable glands, it is vital to balance budget constraints with the need for quality and safety. Investing in high-quality cable glands from reputable manufacturers like Atlas Metal can result in greater reliability, reduced maintenance costs, and ultimately, a safer industrial environment.

Conclusion: Making an Informed Decision

Choosing the right ATEX cable glands is a critical decision that affects the safety, efficiency, and compliance of industrial operations in hazardous areas. By understanding the ATEX directives, industries can ensure their electrical installations are safe and reliable. 

We, at Atlas Metal, are committed to providing quality custom metal solutions, including ATEX cable glands, that meet the highest standards of safety and performance. By making an informed decision, you can uphold the safety and efficiency of your operations while adhering to international standards.

FAQs

Selecting the right ATEX cable gland involves assessing the specific hazardous zone classification, environmental conditions, and mechanical requirements of your installation.

No, ATEX cable glands require regular inspection and maintenance to ensure they function properly and continue to provide safety in hazardous environments.

The main types include Increased Safety Glands (Ex e), Flameproof Glands (Ex d), Dust-proof Glands (Ex t), and Glands for Extreme Temperatures, each suited for different hazardous conditions.

Popular Products Recommended

  • Cable Gland Type A2F
    Cable Gland Type A2F
Atlas Metal - Leading the Industry in Quality Cable Lugs Manufacturing
Categories Cable Gland

How is Atlas Metal Revolutionising the Cable Gland Industry in India

Categories Cable Gland Posted on

In recent years, India’s industrial sector has seen significant growth, with the cable gland industry playing a crucial role. Among the leading manufacturers, Atlas Metal stands out for its dedication to quality and innovation. At Atlas Metal, we are not just a part of India’s cable gland industry; we are transforming it. Our commitment to innovation, quality, and customer satisfaction motivates us to set new standards and reshape industry practices. This blog is our journey through the world of cable gland manufacturing, where we’ll showcase our quality products and advanced solutions.

Advantages of Using Cable Gland Accessories  by Atlas Metal

At the core of electrical safety and functionality, our cable glands play a pivotal role. They offer multiple benefits:

Enhanced Electrical Safety: Our products are designed to combat the risks of electrical hazards. By effectively sealing off dust and moisture, they prevent the occurrence of short circuits and electrical fires, ensuring a safer environment.

Stable and Secure Connections: We understand the importance of reliability. Our cable glands are engineered to provide a firm and enduring grip on cables, ensuring that connections remain stable even in demanding conditions.

Durability and Longevity: Our focus extends beyond immediate functionality to long-term performance. By protecting cables from environmental and mechanical stresses, our cable glands significantly extend the lifespan of electrical systems, making them a cost-effective solution in the long run.

Range of Cable Gland Accessories  Offered by Atlas Metal

Diversity in the product range is our strength. We cater to a wide array of industrial needs with our varied offerings:

Armoured Cable Glands: Specially designed for metal-armoured cables, these glands provide effective grounding and termination. They are ideal for applications where mechanical protection and earthing are crucial.

Unarmoured Cable Glands: Tailored for plain cables commonly used in control, instrumentation, and telecommunication applications, these glands offer the versatility needed for a range of unarmoured cables.

Hazardous Area Cable Glands: Understanding the critical nature of explosive environments, we have developed glands that meet the highest safety standards, ensuring robust performance even in the most challenging conditions.

How to Choose the Right Cable Gland Accessories

Selecting the appropriate cable gland is vital for ensuring safety and efficiency. We guide our customers through this process with key considerations:

Cable Type and Size: The choice of the gland is largely dependent on the type and diameter of the cable. This ensures a perfect fit and optimal functionality.

Material and Environment: We offer glands in various materials such as brass, stainless steel, and more, chosen based on environmental exposure. Each material is selected for its durability and suitability to specific conditions.

Certifications: Our products proudly comply with national and international standards and have the necessary certifications to their name. This adherence to standards is a testament to our commitment to quality and safety.

Installation Process of Our Cable Gland Accessories

Installation of cable glands is a critical process that demands attention to detail. Our products are designed for ease of installation, yet we emphasise the importance of following the correct procedure:

Selecting the Correct Gland: It begins with choosing the right gland for the specific cable type and size, ensuring a perfect match.

Preparation: Dismantling the gland correctly and positioning it over the cable is crucial for a seamless installation process.

Secure Attachment: The final step involves tightening the gland components for a snug and secure fit, ensuring optimal performance.

Maintaining and Troubleshooting Our Cable Gland Accessories

Maintenance and troubleshooting are integral to the longevity and reliability of our products. We recommend:

Regular Inspections: Periodic checks for signs of corrosion, loosening, or damage are essential. This proactive approach helps in the early detection of potential issues.

Tightness Checks: Ensuring that all parts of the cable gland are correctly tightened and remain so is critical for maintaining the integrity of electrical connections.

Timely Replacement: We advise replacing any worn or damaged glands promptly to maintain safety and functionality standards.

Our Innovations in Cable Gland Accessories

Innovation is the cornerstone of our success at Atlas Metal. Our advancements include:

Environmentally Resistant Designs: We develop glands capable of withstanding extreme conditions, ensuring reliability in diverse environments.

User-friendly Installation: Our focus on simplifying installation processes has led to the creation of designs that are not only efficient but also easy to use.

Customisable Solutions: Understanding that each industrial requirement is unique, we offer customisable solutions to meet specific challenges and demands.

Atlas’s Position Among India’s Top Manufacturers

At Atlas Metal, we pride ourselves on our unwavering commitment to quality and customer service. Our deep understanding of industry needs, coupled with our dedication to innovation, positions us not just as a manufacturer but as a trailblazer in the cable gland market.

Our Vision for India’s Industrial Growth

We are deeply invested in contributing to India’s industrial sector. Our high-quality cable glands play a crucial role in the development of key industries. Our focus on sustainability, innovation, and quality drives us to make significant contributions to India’s industrial progress.

Our Future Endeavours

Looking to the future, we aim to further enhance our position as industry leaders. Focusing on continuous innovation, quality products, and expanding our global presence, we are well-equipped to meet the evolving demands of the industry and continue our legacy of excellence.

Conclusion

At Atlas Metal, our journey is defined by our commitment to innovation, quality, and excellence. We are not just participants in India’s industrial growth; we are catalysts driving it forward. Through our advanced solutions, customer-centric approach, and deep industry expertise, we continue to set benchmarks and lead the way in the cable gland industry.

For more information, connect with our team or submit your enquiry. 

A comprehensive guide to industrial cable glands
Categories Cable Gland

A comprehensive guide to industrial cable glands

Categories Cable Gland Posted on

As a renowned manufacturer in the metal industry, Atlas Metal recognises the significance of quality and reliable cable glands in industrial applications. In this blog, you will gain detailed knowledge about cable glands, including their types, installation, and maintenance.

Industrial Cable glands are vital for providing secure connections and protecting cables. Whether in hazardous environments or heavy-duty applications, industrial cable glands ensure optimal electrical installations by offering essential protection. They are used in industries like railways, oil and gas, and mining, providing crucial protection and reliable connectivity for a wide range of applications.

Now, let’s explore the different types of industrial cable glands.

stainless steel cable glands
Brass cable glands
Armoured cable glands
Metal cable glands 03

Types of Industrial Cable Glands

Let us learn about the different types of earthing bars that are used based on specific requirements.

1. Armoured Cable Glands
Armoured cable glands are designed to use with armoured cables. These cable glands provide secure and reliable connections while offering enhanced protection against mechanical strain, ensuring the integrity of the cable in demanding environments.

2. Metal Cable Glands
Constructed from durable metals such as brass or aluminium, metal cable glands offer robustness and longevity. They provide excellent protection against environmental factors and are suitable for a wide range of industrial applications.

3. Stainless Steel Cable Glands
Stainless steel ss cable glands are ideal for harsh and corrosive environments. They offer exceptional resistance to corrosion, which makes them highly durable and suitable for industries such as marine, oil and gas, and chemical processing.

4. Brass Cable Glands
Known for their excellent electrical conductivity and resistance to corrosion, brass cable glands are widely used in various industrial settings. They offer reliable sealing and secure connections, making them a popular choice for various applications.

5. Plastic Cable Glands
Made from high-quality engineering plastics, these cable glands offer cost-effective solutions for non-corrosive environments. They are lightweight, easy to install, and provide good sealing properties, making them suitable for a range of industrial and commercial applications.

Materials used in Industrial Cable Glands

While choosing an earthing bar, consider the following criteria for optimal performance:

1. Polyamide
Durable and chemically resistant material commonly used for industrial cable glands.

2. PVC
Versatile material providing good electrical insulation for industrial cable glands.

3. TPE
Flexible and weather-resistant material used for reliable sealing in cable glands.

4. Rubber
Offers excellent sealing properties and protection against moisture and environmental elements in cable glands.

5. Metal Alloys
Robust and corrosion-resistant materials like brass, aluminium, or stainless steel are mainly used for industrial cable gland applications.

Selection Criteria for Industrial Cable Glands

Consider the following key criteria while choosing industrial cable glands to ensure optimal performance, safety, and longevity of electrical installations.

1. Cable Diameter and Type

Accurate measurement of the cable diameter is essential for selecting the appropriate gland size. Consider the cable type as well, such as armoured, unarmored, or braided, to ensure a secure and proper fit. Atlas Metal advises carefully matching the cable dimensions to the compatible cable gland, ensuring effective sealing and strain relief.

2. Operating Temperature and Pressure

Take into account the expected operating temperature and pressure conditions in your application. Different cable glands are designed to withstand varying temperature ranges and pressure levels. Atlas Metal recommends choosing cable glands that are compatible with the anticipated environmental conditions to ensure reliable performance and avoid premature failure.

3. Environmental Conditions

Evaluate the surrounding environment where the cable glands will be installed. Factors such as moisture, dust, chemicals, or extreme weather conditions should be considered. Atlas Metal emphasises selecting cable glands with appropriate IP (Ingress Protection) ratings and materials that offer suitable resistance ensuring reliable protection against environmental elements.

4. Systematic Classification of Hazardous Areas

In applications involving hazardous areas, such as explosive atmospheres, it is vital to choose cable glands that meet specific requirements. Atlas Metal advises systematically classifying the hazardous area and selecting cable glands with suitable certifications, such as ATEX or IECEx, to ensure compliance and safety.

By carefully considering the above selection criteria, you can confidently choose industrial cable glands that will align with your application’s needs, ensuring secure connections, reliable performance, and enhanced safety in your electrical installations.

Step-by-step Installation Procedures for Industrial Cable Glands

To ensure a proper and efficient installation of cable glands, the steps given below can be followed.

Step 1: Prepare the Cable
Measure and cut the cable to the desired length, ensuring sufficient excess for proper connection to equipment.

Step 2: Strip the Cable
Use cable strippers to remove the outer insulation, exposing the conductors. Take care not to damage the inner wires.

Step 3: Select the Correct Cable Gland
Choose a cable gland that matches the cable diameter and type, ensuring a secure and proper fit.

Step 4: Prepare the Cable Gland
Disassemble the cable gland by removing the locknut, sealing ring, and gland body. Place the sealing ring onto the cable.

Step 5: Insert the Cable into the Gland
Carefully thread the cable through the gland body until it reaches the sealing ring. Make sure the cable is centred and not twisted.

Step 6: Tighten the Locknut
Slide the gland body over the cable and hand-tighten the locknut onto the body until it is snug. Avoid over-tightening.

Step 7: Check for Proper Positioning
Ensure that the cable is properly positioned within the gland and that the sealing ring is correctly seated. Adjust if necessary.

Step 8: Secure the Gland in Place
Use a spanner or wrench to tighten the locknut securely, ensuring a watertight and secure connection.

Step 9: Test the Connection
Conduct a thorough visual inspection to ensure the cable gland is properly installed. Perform any required electrical or continuity tests.

Step 10: Finalise the Installation
Secure the cable gland to the equipment or enclosure, following the manufacturer’s instructions. Make sure the cable is properly strain relieved.

It is important to note that these installation steps are provided as a general guide. Always consult with a qualified installation specialist and ensure secure connections and optimal performance.

Regular Inspection and Cleaning for Cable Gland Maintenance

As a leading cable gland manufacturer, Atlas Metal suggests that you conduct routine inspections of cable glands to check for any signs of wear, corrosion, or damage. Clean cable glands periodically to remove dust, debris, or contaminants that may hinder performance. Below listed are some of the problems that you may encounter during the regular inspection.

1.Problem:Inadequate sealing is leading to moisture or dust ingress.
Solution: Ensure proper installation and use of suitable sealing materials.

2.Problem: Poor cable retention causing slippage or loosening.
Solution: Check the grip of the cable gland and adjust or replace, if necessary.

3.Problem: Thread mismatch or improper gland size selection.
Solution: Double-check compatibility and choose the correct size and thread type for a secure fit.

4.Problem: Cable gland accessories are not properly installed or functioning.
Solution: Verify the proper installation and functionality of accessories such as locknuts, washers, and sealing rings.

Conclusion

A detailed understanding of industrial cable glands is crucial for achieving efficient and reliable electrical installations. By comprehending the various types, materials, and installation procedures, you can make informed decisions and ensure optimal performance in your applications.

With over two decades of experience, Atlas Metal stands as a trusted leader in the metal industry, specialising in manufacturing high-quality electrical and lightning safety solutions, including cable glands and cable gland accessories. Atlas’s commitment to excellence and relentless pursuit of innovation guarantee the manufacturing of premium quality products that prioritise safety and superior performance.

Things to keep in mind while choosing the right cable gland size
Categories Cable Gland

Things to keep in mind while choosing the right cable gland size

Categories Cable Gland Posted on

As a leader in the metal industry for over 25 years now, we at Atlas Metal understand the significance of choosing the correct size of a cable gland for various applications. Therefore, in this blog post, we will explore the importance of selecting the right size of cable glands and the steps and parameters that help us to choose one.

Choosing the right size of cable glands is of paramount importance to ensure the effectiveness and safety of electrical and lightning safety solutions. A wrong-sized cable gland can lead to numerous issues, such as inadequate sealing, poor cable retention, and compromised performance. It can also result in potential hazards like electrical failures, and short circuits. By understanding the importance of selecting the correct size, you will be able to ensure optimal functionality, reliable connections, and enhanced safety in your electrical installations.

Now, before determining the suitable size for cable glands let us understand the various types of cable glands.

Aluminum cable glands
Cable glands 02
ATEX cable glands
compression cable glands
Cable glands 01

Types of Cable Glands

1. A2 Compression Cable Glands

A2 Compression Cable Glands is a reliable choice for secure and efficient cable connections, providing excellent strain relief and sealing capabilities while ensuring optimal performance in various industrial applications.

2. ATEX Cable Glands

Designed to meet strict safety standards for use in hazardous environments, ATEX cable glands are specifically engineered to prevent the ignition of explosive gases and dust, providing reliable sealing and protection.

3. Aluminium Cable Glands

Aluminium Cable Glands are known for their lightweight yet durable construction, offering excellent corrosion resistance. They are ideal for applications where weight reduction and robust protection are required.

4. E1W Cable Glands

E1W Cable Glands provide exceptional sealing against moisture and dust ingress, making them suitable for both indoor and outdoor installations. These glands are widely used to ensure reliable connections in harsh environments.

5. CW 3 PT Cable Glands

CW 3 PT Cable Glands offer superior cable retention and sealing capabilities, making them a popular choice for heavy-duty applications. They provide effective protection against environmental factors such as dust, water, and mechanical stress.

Atlas Metal manufactures a diverse range of cable gland solutions under the banner ATCAB, including, A2 compressor cable glands and aluminium cable glands. The cable glands are tailored to meet the varied requirements of industries.

What Factors To Consider While Choosing A Right Cable Gland Size

When selecting the right cable gland size, several factors should be taken into consideration to ensure optimal performance and safety.

1. Cable Diameter

Measure the outer diameter of the cable accurately to determine the appropriate gland size that provides a snug fit without excessive compression or strain.

2. Cable Material

Different cable materials have varying flexibility and thickness, affecting the required gland size. Consider the characteristics of cable materials to select a compatible size.

3. Installation Method

Consider the installation process and available tools. Ensure that the chosen gland size aligns with the installation method, whether it’s thread or compression-based.

4. Sealing Requirements

Determine the level of ingress protection needed. Ensure that the selected gland size offers adequate sealing to prevent the entry of dust, water, or other contaminants.

5. Cable Retention

Check the weight and movement of the cable. Choose a cable gland size that provides sufficient grip and strain relief to keep the cable securely in place.

Steps To Determine The Correct Cable Gland Size

Follow the steps given below to determine the appropriate cable gland size and ensure a proper fit.

1. Measure The Cable Diameter

Accurately measure the outer diameter of the cable using callipers or a measuring tape. This measurement is crucial in determining the appropriate gland size that provides a secure fit without excessive compression or strain.

2. Determine The Thread Size And Length

Identify the thread size and length required for the installation. This will ensure compatibility between the cable gland and the equipment or enclosure where it will be installed, providing a proper and secure connection.

3. Select The Correct Cable Gland Size

Refer to cable gland size charts provided by manufacturers or industry standards. Match the measured cable diameter with the corresponding gland size to ensure a proper fit and effective sealing against environmental elements.

4. Double Check The Compatibility

Before finalising the selection, verify the compatibility of the chosen gland size with the cable material, operating environment, and any specific standards or certifications required. This step ensures the cable gland meets the necessary criteria for optimal performance and safety.

Some More Tips For Choosing the Right Size Of Cable Glands

Consult with Manufacturers

Reach out to cable gland manufacturers or suppliers for expert advice on selecting the right size. They can provide valuable insights based on their expertise and product knowledge, ensuring an appropriate gland size for your specific requirements. At Atlas Metal, customer-centricity is paramount, ensuring that each customer is provided with tailored solutions that perfectly align with their specific requirements.

Consider the Environmental Conditions

Take into account the operating environment where the cable gland will be installed. Factors such as temperature fluctuations, moisture levels, exposure to chemicals, and mechanical stress. Select a size that can withstand these conditions and maintain effective sealing.

Double Check The Dimensions

Accurately measure the cable diameter and cross-reference it with the manufacturer’s size charts or guidelines. Ensure that the selected gland size aligns with the measured dimensions.

Top Indian Cable Gland Manufacturers in India

The Indian cable gland manufacturing industry has gained widespread recognition worldwide for its expertise and high-quality products. With a strong presence in the global market, Indian manufacturers have become synonymous with reliability and innovation. One of the leading cable gland manufacturers is Atlas Metal. With over 25 years of experience, Atlas has earned a reputable status for manufacturing premium cable glands under the banner ATCAB. In addition to cable glands, Atlas also offers a diverse range of related products that cater to various electrical and lightning safety needs.

Conclusion

The correct size of cable glands plays a critical role in maintaining the effectiveness and safety of electrical and lightning safety solutions. Failure to choose the appropriate size can result in a range of problems and potential hazards. By prioritising the selection of the correct size, you can safeguard against issues like inadequate sealing and compromised performance, ensuring reliable connections in electrical installations.

Cable Gland Manufacturer in India
Categories Cable Gland

How to Install Cable Glands in easy steps: A Comprehensive Guide by Atlas Metal

Categories Cable Gland Posted on

Cable glands play a vital role in ensuring the safety and reliability of electrical systems. With over 25 years of industry expertise, Atlas Metal has emerged as a leading manufacturer and provider of high-quality cable glands and solutions. In this blog, we will delve deeper into the world of cable glands, focusing on cable gland manufacturers in India, specifically in Jamnagar, as well as highlighting the significance of brass cable gland manufacturers. Additionally, we will provide an in-depth overview of cable gland installation procedures to ensure optimal performance, and discuss the cable glands size chart and cable glands sizes to guide you in selecting the right product.

India – A Established Leader in Cable Gland Manufacturing

India’s cable gland manufacturing industry is renowned worldwide, with Jamnagar in Gujarat serving as a prominent hub for manufacturers. Among them, Atlas Metal has earned a trusted and reputable status as a manufacturer and exporter of premium cable glands under the banner ATCAB and ATFIT for over two decades. With a steadfast commitment to superior quality and innovative solutions, Atlas Metal has gained recognition both domestically and internationally. 

Jamnagar, known as the ‘Brass City,’ boasts a skilled workforce, state-of-the-art infrastructure, and extensive expertise in the brass industry, making it an ideal location for cable gland manufacturers in India. Capitalising on these advantages, Atlas Metal has established itself as a reliable and renowned brass cable gland manufacturer, offering a diverse range of products to meet the diverse `requirements of various industries.

stainless steel cable glands
Brass cable glands
Armoured cable glands
Metal cable glands 03

Types of Cable Glands

Brass Cable Glands
Brass cable glands are widely recognised for their superior quality, durability, and resistance to environmental factors as brass possesses excellent electrical conductivity and corrosion resistance, making it an ideal material for cable glands.

Stainless Steel Cable Glands
Stainless steel cable glands are known for their exceptional corrosion resistance, making them ideal for harsh environments or applications where exposure to moisture, chemicals, or extreme temperatures is a concern. They offer high mechanical strength, durability, and reliability, ensuring long-lasting performance and protection for cables.

Explosion-Proof Cable Glands
Explosion-proof cable glands are crucial in hazardous environments where the potential for the presence of flammable gases or dust exists. These glands are designed to prevent the ignition of surrounding explosive atmospheres by providing a secure seal and mechanical protection. They are commonly used in oil and gas facilities, petrochemical plants, and mining operations.

Armoured Cable Glands

Armoured cable glands are designed to provide secure connections and strain relief for cables with metallic armouring, such as steel wire or aluminium tape. These glands offer additional protection to the cables, preventing damage from external forces or accidental impact. Armoured cable glands are commonly used in industries where robust cable protection is required, such as construction, mining, and heavy machinery.

While there are several types, Atlas Metal is a leading brass cable gland manufacturer. Atlas utilises high-grade brass alloys to manufacture superior-quality cable glands. The brass cable glands ensure secure connections, effective strain relief, and robust environmental protection for a wide range of applications.

Cable Glands Size Chart and Sizes

Understanding the cable glands size chart and the different cable glands sizes is crucial for selecting the appropriate gland for your application. It provides detailed information on the dimensions and specifications of various cable glands, helping you determine the correct fit for your cables. Atlas Metal offers a comprehensive size chart that includes the following details:

Thread Size: The standard size of the cable gland’s entry thread.

Cable Range: The minimum and maximum cable diameter that the gland can accommodate.

Overall Length: The total length of the cable gland.

Hex Size: The size of the hexagonal part of the gland for tightening.

By referring to the cable glands size chart, you can ensure that you select the right gland that meets your specific requirements.

Installation of Cable Glands

Installation of Cable Glands

Proper installation of cable glands is paramount to ensure the longevity and safety of electrical systems. Here is a step-by-step guide to installing cable glands effectively:

  1. Select the Appropriate Cable Gland: Consider the application, cable type, and environmental conditions to choose the right cable gland for the job.
  2. Prepare the Cable: Strip the cable to the correct length, ensuring the armour or braid is exposed as required.
  3. Assemble the Cable Gland Components: Follow the manufacturer’s instructions to assemble the cable gland components accurately.
  4. Insert the Cable: Insert the prepared cable into the gland, ensuring that the armour or braid is securely clamped.
  5. Tighten the Gland Body: Using the recommended torque value, tighten the gland body onto the enclosure or panel to achieve a secure fit.
Essential Tips for Installation of Cable Glands

Essential Tips for Installation of Cable Glands

To ensure optimal performance and safety, here are some essential tips to consider during cable gland installation:

  • Proper Torque Application: Ensure the cable gland is tightened to the recommended torque value to prevent under or over-tightening, which can lead to poor performance or cable damage.
  • Sealing Elements: Utilise the appropriate sealing elements, such as O-rings, gaskets, or washers, as recommended by the manufacturer, to provide effective environmental protection.
  • Regular Maintenance: Schedule regular inspections and maintenance of cable glands to identify any issues or signs of wear, ensuring their ongoing performance and mitigating potential hazards.

Overview of the Cable Gland Industry Worldwide

The cable gland industry in India continues to evolve rapidly, driven by technological advancements, infrastructure development, and the increasing demand for safe and efficient electrical systems. Atlas Metal remains at the forefront of this industry, constantly innovating and delivering reliable cable gland solutions to customers worldwide. As a leading cable gland manufacturer in India, particularly in Jamnagar, Atlas Metal has played a significant role in shaping the cable gland industry by offering cutting-edge products and staying abreast of industry trends.

With a commitment to quality, Atlas Metal utilises advanced manufacturing techniques and adheres to stringent quality control measures to ensure that the produced cable glands meet the highest standards. By leveraging its expertise in brass cable glands, Atlas has established a strong reputation for delivering durable, reliable, and efficient solutions.

Submit your Needs

Cable glands are indispensable components for ensuring the safety, reliability, and longevity of electrical systems. As a leading cable gland manufacturer in India, particularly in Jamnagar, Atlas Metal has established itself as a trusted provider of high-quality cable glands. With a focus on brass cable glands, Atlas offers a range of solutions that exhibit durability, corrosion resistance, and excellent electrical conductivity.

By adhering to proper installation techniques and following the manufacturer’s guidelines, users can maximise the benefits of cable glands and mitigate potential hazards. With Atlas Metal’s commitment to innovation, product development, and exceptional customer support, Atlas continues to contribute to the growth and advancement of the cable gland industry in India and beyond.

FAQs

Brass cable glands offer excellent electrical conductivity, corrosion resistance, and durability, making them a top choice for cable gland manufacturers in India.

Use the cable glands size chart, prepare the cable, assemble components, insert the cable, and tighten to the recommended torque for secure installation.

Refer to the cable glands size chart to select the correct size based on your cable's diameter and application requirements.

The cable glands size chart details thread size, cable range, overall length, and hex size to help select the right cable gland size.

Popular Products by Atlas Metal

Atlas Metal offers a diverse range of high-quality products. These products are designed to provide superior performance, durability, and protection in various industrial and commercial applications, ensuring secure connections and optimal safety.

1 2 3 4